Showing posts with label alpina. Show all posts
Showing posts with label alpina. Show all posts

Sunday, January 7, 2024

evan wilcox's dad


Evan Wilcox sent this photo of his Dad on a Bultaco Alpina that he rode in trials events back in the day. Such a cool image! If you aren't aware of Evan's work then you need to be. Check out his amazing motorcycle tanks and metalwork. We've never met, but he seems like an outstanding individual as well.



 

Saturday, January 25, 2020

Wednesday, June 21, 2017

alpina owners manual








alpina




alpina vs sherpa t







When the Alpina was introduced in 1971 as a playbike version of Bultaco's championship trials bike the Sherpa T, it was described as a trials bike with different geometry. The changes made it less focused with more range (bigger tank), a comfortable seat and higher gearing. The higher gearing came from the Matador, the tank got wider and more rounded as the capacity went from 1 gallon to 2 gallons....but what were the geometry changes? The recent acquision of an early seventies Bultaco parts manual provided the answers. Turns out both bikes shared the Alpina frame with 27.5 degrees rake.


The swingarm was also used on both bikes...



A different offset in the triple clamps would provide a different amount of trail but once again, shared components.



A different length fork would change the rake but once again...the fork is shared and from an earlier Sherpa T.



So it appears that an early Alpina is really a Sherpa T in different clothes.


I came across the info above on another blog. Just saving it for future reference.


alpina fiberglass tank





 Two Saturdays ago I sealed the fuel tank on the Bultaco with the Caswell tank sealer. The fiberglass tanks can't handle the ethanol in modern fuel and will literally dissolve if they aren't sealed. I've used various fuel tank sealers over the years, but the Caswell kit is recommended for fiberglass tanks. It came out well and I was able to fill the tank with gas and ride it around the entire weekend.


Friday, June 9, 2017

bultaco alpina
















Nick from Moto-fied Cycles in Milwaukee and my friend John McGeen picked up a Bultaco Alpina for me a couple weeks ago. John also picked up a newer Alpina from the same owner. Jill and I were planning a trip to Illinois for out annual Cemetery Hop Family Reunion and I was planning on picking up a couple tools that I had left with John, so I drove up and met John so I could pick up the bike. We had just driven twelve hours from North Carolina the day before, so I headed out for Wisconsin early two Saturdays ago in the morning to meet John. I met John and Nick before noon to pick up the tools and the sweet "new" Alpina. 

It was so good to see John and to meet Nick and give him the KZ breather covers that I made. I have really missed seeing John and i was bummed that I couldn't stay long to chat or see his Triumph Cub. I needed to get back in time for a family dinner so I was trying to hustle. I also wanted to catch up with Eric in Chicago for just a bit. It was so good to be able to run past his place and see his family. I look forward to being able to visit his new shop when I am able to stay for a bit longer. 

I got back to Illinois in time to meet up with the family and then I stayed up late with my Dad and we worked on the Bultaco. The clutch side flywheel was loose so I tightened it up. When I did this I ended up realizing that the piston was seized. The owner had said that the bike turned over and in fact it did since someone had loosened the flywheel bolt. I popped the exhaust pipe off and popped the head to discover that the piston was in good condition as was the cylinder. My Dad and I heated the piston and cylinder a bit with a propane torch and then sprayed some penetrating oil in the cylinder. I put a little pressure on the kickstarter and things freed up instantly. The rings must have been temporarily frozen. There was no ridge on the cylinder so I steel-wooled the interior to removed any debris and buttoned things back up. I cleaned the carb and checked for spark. Things looked good so I kicked it over a few times and was able to get it running. I soon discovered that the spark would eventually fade as I kicked the bike repeatedly. This indicated a bad condenser to me so I was going to have to pop the magneto to be able to access the condenser. The Spanish bikes are notorious for having failing condensers since they are exposed to the heat inside the engine cases. Removing it and mounting a new condenser near the coil on the frame would solve my issue and get a nice fat spark back. 

Since we didn't have the proper flywheel puller, I decided to button up the cases and call it a night. I loaded the bike up after our family reunion and we drove back to North Carolina with the Bultaco on the back; you can see Jill above at a gas station in Indiana scratching her head trying to figure out why she married the idiot with a motorcycle addition. I got some looks on the way home and when we stopped at rest area a guy offered to buy it from Jill when I was inside. Luckily, she didn't take the offer. 

I got the bike home and this past weekend, I installed new DOT approved tires. I would like to be able to ride the Alpina to the studio from time to time so I'm looking forward to working on it. I'm not going to do a restoration on it; I just want to get the fuel tank sealed and ride it. I used a little 3M buffing compound and the tank's gel coat came back nicely to a nice shine. The flywheel puller came in on Wednesday this week.

Thanks to John and Nick for picking up the bike for me.



Followers