Just thinking of Jim Hinze and Matt Mabee (two of my former graduate students) tonight as I'm dreaming about building a studio in the mountain/woods. Great stuff in this video of Tom Kundig; one of my favorite architects.
Showing posts with label architecture. Show all posts
Showing posts with label architecture. Show all posts
Thursday, March 16, 2017
Saturday, March 19, 2016
wuwm architecture fab lab
Matt Mabee (3rd from Left) and Gil Synder (2nd from Left) were featured on WUWM last week as they discussed the development of the School of Architecture and Urban Planning prototyping lab. Matt was one of the grad students who I worked with in the early years of research into digital fabrication and he used to hang out in my personal studio with Jim Hinze as they worked on creating architectural artifacts for their various building designs. Matt later worked in our Sculpture studio as a technician and then secured the position in the Prototyping Lab in SARUP. Gil has been a great mentor to me since I arrived at UWM. I always enjoyed our discussions on teaching students to understand material and process when designing. So glad to see both of these guys getting attention for their work. The Digital Craft Research Lab would not be in existence without these two gentlemen.
Tuesday, August 18, 2015
citizen architect
Aaron just sent this to me. I'm still looking for the film so I can watch the entire documentary. This trailer speaks to me though. Reminds me of the the design build stuff that Matt and Jim used to talk about and Eric's grain silo house that we used to talk about. It also makes me realize how important it is for my students to understand the importance of designing and building for others and their needs. Makes me question work/objects for the 1% of people who can afford or relate to things.
Friday, May 15, 2015
kse/dcrl open studios 2014
One of my most favorite days of the year, is our Kenilworth Open Studios event that happens each Spring semester. This always brings a ton of people to our lab spaces and gives us an opportunity to share what our students are learning and creating. It also allows the students in the DCRL the opportunity to network with people and create relationships. It was good to see the older generation out in full effect and engaging in questions with us. I was on the receiving end of so many great comments and conversations about what implications our student work is having.
I had the privilege to see many alumni this year and it was such a joy to talk to one of my former Architecture students, Caleb, who was in one of the early groups of students that worked in my studio to develop FabMeth models. Caleb was working with me when I first had the vision of creating a unique collaborative work space that fostered creativity centered around material/process and the fusion of traditional and digital craft forms. I was so glad he was able to see what his work spawned. It was very special and meaningful for him to recognize the realization of the things that we talked about so many years ago.
I am so grateful for all of the students that paved the way for the students that I have now and the contributions that each of those early students made by creating their best work ever. They may not realize it but they started something special that continues to grow. Bryant, Matt, and Jim were three of the pioneers that started this all with me and I don't think there is a week that goes by that I don't think about them when I step into the DCRL.
Labels:
architecture,
dcrl,
digital craft,
digital fabrication,
kenilworth,
kse,
open studios,
uwm
Monday, June 10, 2013
mit architecture
Make sure to stay with this one; if you're impatient skip to 10:43 and watch from there to be blown away.
Wednesday, April 24, 2013
cnc spancrete panels
Matt came over to the DCRL last night and we cut a large panel for the Spancrete Architecture studio course. I cut three other panels today for him and he came over in the afternoon to help out with the last one. These foam panels are going to be used to cast concrete panels at Spancrete. The large CNC router performed really well, and we didn't have any issues. Each panel took a little over an hour to cut and we cranked things up a bit. I'm still playing with the motor tuning, and today had things moving well at 700 inches per minute when jogging, but still only running code at a bit over 120 ipm. I'm going to tweak things and see if we can get things running even faster since the jog runs so smoothly at that high of a velocity.
Labels:
architecture,
cnc,
cnc router,
dcrl,
spancrete
Saturday, February 16, 2013
ball state architecture
Dustin Headley came to my artist talk and brought some of his students from the Ball State Architecture program. He currently teaches an Architecture studio course at Ball State, so he took me over to their building (as I was asking him about i.M.A.D.E.) after my talk. It was cool to see some of the projects that I had seen on their website. He took me down to their fab lab area and we walked through the woodshop. Then we headed up to his students studio so I could look at some of the material studies that his students were doing. I talked with a couple of his students about their projects before heading back over to the art building. They are doing some material studies similar to Kyle's class here at UWM and the work looks really great. The entire building was full of activity. Very inspiring to see everything happening.
He also informed me about to individuals in town that had gone through the program and that have their own design/build shop in Muncie. It's called Projectione. Unfortunately I had to leave town before meeting them, but from what I can tell, they have a lot going on. Dustin was super cool, and so kind to show me around the place. We exchanged info so I'm sure I'll be hearing more from him in the future.
Subscribe to:
Posts (Atom)



















