Showing posts with label belt grinder. Show all posts
Showing posts with label belt grinder. Show all posts

Monday, September 3, 2018

kmg clone belt grinders


















In between projects this summer, I worked on building a couple more KMG clone belt grinders. I built one of these many years ago, and I've used it a ton. I was thinking of making one for the campus studio and I had enough material to build two, so I decided to just get two going at the same time. My old one needed a tune-up too, so I figured it would be a good time to radius the corners on all the parts on the old grinder as well. 

As I was building these, I was informed that the safety folks at school might not like the idea that a piece of equipment, that was built by someone other than a commercial entity, was being used by students. Everyone's worried about getting sued; regardless that it's a copy of an existing design. This pretty much sums up the educational system and the type of students that we're sending out of the place; better play is safe and sit on our hands. Never-mind we have no budget to buy new equipment and I'm actually covering the labor and materials on my own dime during the summer months when I don't get paid. 

I guess I'll just have three fancy belt grinders in my own shop to use. At least if I get hurt, I'll know who to sue...



Sunday, February 23, 2014

grinder contact wheel






























When I built my Beaumont knock off replica grinder a while ago, I had planned on making a large diameter contact grinding wheel for it. I ordered extra bar stock so I could make it, but once I got the base grinder completed, I started using it right away with the standard two wheel flat platen setup and never got around to making the bar for the contact wheel. A few days ago I was cleaning my studio and came across the bar stock and decided to bang this out in a few minutes. I laid out the radius on the end of the piece of steel, marker the center, cut the excess off, and used the grinder to smooth everything out. I pilot drilled the contact wheel mounting hole, then drilled to size, and threaded the hole. I always use the drill press (without turning it on) as a way to get the tap started straight. Then I mounted the contact wheel to the bar and slid it into position on the grinder. I'm happy to say it turned out well and runs super smooth. Now I just need to make a holder for the various arm attachments. Of course now I want to build another grinder so I can leave both arms mounted so I don't have to change them out. Time will tell...





Followers