Showing posts with label bulkhead. Show all posts
Showing posts with label bulkhead. Show all posts

Wednesday, January 7, 2026

bulkhead templates







On Sunday, I spent some time making these templates to replace the door hinge/pillar on the bulkhead. Again these are readily available parts, but they would be fairly easy to make too and I've got the sheet steel to do it. I know it would go faster if I just purchased the parts, but I can put that money into other parts if I make these from scratch. School is starting back up so all my progress in the last few weeks will come to a screeching halt.

 

drivers side bulkhead mount








The drivers side bulkhead mount where it bolts to the frame was damaged in the collision I mentioned earlier. I heated it up and beat it into shape, but I may need to be rebuilt. This is a common replacement part though. 

 

bulkhead













I started on the bulkhead. Everything connects to this steel bulkhead. It's the core of the vehicle. As I started stripping the wiring, brake tubes, etc. I start to see the problem areas. I'll have some repair to do in the footwells and in the windshield hinge area on the passenger side.  Wire-brushing the bulkhead has made me feel better about its condition though. Some of the areas that looked rusty were just stains and the metal is strong. There are bad sections, but it's all rebuildable. This is the next step to getting this vehicle built back up.


 

Followers