I have my longer ball lead screw finally installed on the HF lathe. I need to make the prototyped bearing holder in metal, but I have everything figured out finally. This has been a long time coming and I'm excited to see the lathe operational again.
Showing posts with label cnc lathe. Show all posts
Showing posts with label cnc lathe. Show all posts
Wednesday, November 5, 2014
Sunday, August 3, 2014
tormach open house pt2
When I arrived at the registration desk at Tormach, in addition to getting a name tag with my two machines serial numbers and an embroidered "machine owner" baseball cap, I was presented with an organized list of events that would be taking place from 10:00am to 3:45pm. There were one hour time slots that had multiple options for different workshops in various parts of the building. For the first session, I attended the Introduction to Tooling and Workholding for the 15L Slant-PRO CNC lathe session. I have been following the development of this new Tormach product, so this was my first chance to see the lathe in person rather than by watching one of Tormach's expert quality videos that they release on their Tormach video library. Mike Corliss (who I recognized from several of the Tormach videos) led this session and thoroughly discussed the various work holding and tool holding options for the Slant-PRO. There was a large crowd at this particular session and the Tormach employees did an excellent job of fielding the questions. Andy Grevstad (another member of the Tormach crew that visited my studio, as well as Senior Applications Engineer at Tormach) was one of several employees that answered questions about the Slant-PRO. Mike did an excellent job of going over the basics of gang tooling and turret tooling and their application on the new lathe. I walked away from this session feeling that I had a better understanding of what my tooling and workholding needs would be if I were to buy a Slant-PRO. I think most people during this session were just anxious to see the lathe run, so there was a lot of hovering around the lathe afterwards. I ran into Tormach videographer and designer, Dan Montenegro (he shot the Tormach video in my studio) after this session and he introduced me to Kyle Mayer who would be conducting the next session involving the Slant-PRO. Dan informed me that he worked on the user interface screens for the cnc lathe control software. Kyle and Dan informed me about the proprietary software and the reasoning behind not using Mach 3 as the Tormach mills do. By creating their own software interface and macros using LinuxCNC based software allows for the proper pulse rate to assure that they could do rigid thread milling on the lathe. Dan was running around shooting pics and footage of the Open House event, but it was really good to see him. Cassie came over in between sessions and showed me the warehouse facility that was to the side of the session room. Impressive to say the least. By the time I had a little time to chat with various people there, it was time for the next session.
Sunday, February 23, 2014
ballscrew threading
I finally got around to cutting the threads on my CNC lathe ballscrew. I had delayed it, since it required a special thread for the BearClaw nut, so I finally ordered the die and got around to cutting the threads. Even though I had turned this section down with limited trouble, the die jet didn't want to dig in at first. I ended up annealing the end so I could get it to "take". Once I did that, it cut like butter.
Friday, September 27, 2013
ball screw support block
I cut the CNC lathe ball screw to length today and turned the other end to size. I found a chuck of alumninum to make a end support from. Maya helped me face the piece and then I drilled and bored it. Measured out the shape of the block and cut it on the Grob and then trued it up on the Bridgeport. I'll need to measure the offset on the screw and mill the block to final dimensions as well as drill it for mounting to the lathe bed. I mocked it up on the lathe when I got home and I think this should work really well.
turning ball screws
With all of the Tormach CNC lathe videos out lately, I've been inspired and have found myself back on the Harbor Freight CNC lathe project. Last time I posted about the lathe, I was in need of a longer ball screw for the carriage and I had messed up the leadscrew nut that I had (I was an idiot one day when I was dismantling the lathe and the nut slid right off the screw sending several bearings bouncing across my studio floor). I purchased some replacement parts, but I needed to turn down the end of the new longer ball screw to be able to adapt it to the bearing housing and the stepper motor coupler. I did some research on how to turn the screw down and to determine how tough a job this was going to be. 5 bears Research had a lot of info on the subject that I found very helpful. The screws are hard so I knew it was going to be a tough cutting job on the lathe. I chucked the screw up on my old South Bend and got things centered well before facing and center drilling. During these operations, I determined that outside of the screw is EXTREMELY hard and the center is very soft. Center drilling was a breeze and once I had the live center butted up against the divot, I began cutting. A lot of people anneal the ends, but warping sometimes occurs from this. Other people grind through the outside coating until they are down to softer steel beneath the surface. I decided to just suck it up and ruin a couple carbide bits while rough the shape. Once I got past the screw ridged, things started to progress more easily and then I switched out to a fresh bit and did all of the finish machining. I got the end turned and the bearing fits very well on the shaft. I still need to thread the end for the jam nut, but that should be straightforward enough. I'm going to size the screw to the lathe bed, shorten it, and then decide if I need to to turn the other end for a end bearing block. A lot of lathe conversions just let the screw float at the other end, but supporting it makes more sense to me. I'll see if I can design a simple bearing block and drill and tap the bed casting. Stay tuned...
Subscribe to:
Posts (Atom)