Showing posts with label electrolysis. Show all posts
Showing posts with label electrolysis. Show all posts

Tuesday, July 7, 2015

fj40 wheel strip









I took my stock rims to the tire shop to get the old tires removed. A couple of the rims were pretty rusty, so I needed to clean these up for paint and new rubber. I made an electrolysis bath for the home garage so I could strip the rust and paint from the wheels. The used disc makes a great steel plate with lots of surface area for the bath. I can complete one wheel per day, so I should have these finished up soon. I've been shopping for tires and trying to figure out what to put on these rims. I'll have to stay fairly tall and narrow due to the narrow rim width. That said, I still have the white wagon wheel rims that I'll be able to redo and mouth some different tires to in the future. Right now, I just want to get the frame back into a rolling chassis and get the tub finished up and bolted back on the frame. So far things are cruising along well.




Thursday, June 18, 2015

electrolysis















I had a few pieces on the FJ that were really rusty, but the rust appeared to be on the surface of the piece. I have read about the use of electrolysis many times for rust removal, but had never actually given it a try. I decided, this week, that I'd give it a try and see if I could refurbish these parts without standing at the sandblaster for an hour or two. I highly recommend the video that Keith Rucker made on the subject of electrolysis. Keith creates some excellent videos and I recommend subscribing to his You Tube channel. 

I ended up using an empty investment bucket for my solution. I took a couple pieces of steel angle and plate and wrapped some annealed steel wire through holes in the pieces and then wired these together for my anode (positive).  Then I wired up the rusty piece as the cathode (negative) and then placed it in the dissolved Washing Soda solution. I believe I probably had about a cup and half of washing soda and five gallons of water in the bucket. I set up the rectifier and dialed it to 12 volts and then walked away for six hours. I came back to the picture you see above. The rust has been converted and it's easy to scrub off the black oxide with a brush and water. Now my parts are ready for paint. Easy peasy!



Followers