Showing posts with label milling machine. Show all posts
Showing posts with label milling machine. Show all posts

Tuesday, November 1, 2016

moving mills












A few weeks ago I was able to finally get my Bridgeport mills off the skids and onto the floor in my studio. This always gives me great stress as I usually am doing this by myself and I always fear that I'm going to damage something. Jill was kind enough to buy me a new engine hoist that happened to be on sale at Harbor Freight. I got the hoist assembled and then decided to try lifting the green mill to make sure the hoist would handle the weight. I went ahead and went for the move with no trouble. A few days later, I moved the black mill. Upon the advice of the Hammerwhisperer, I lowered the table and flipped the head to get the weight low. I think this actually helped a lot and I felt better (maybe I just had some practice under my belt though). I also moved the mills around on the rods as I usually do. I don't have any shots of their final resting place but I placed them side by side but facing opposite directions. It ends up taking the least amount of space by doing this. This opened up way more space in my studio once I got the mills located. I have done a ton of work to the studio and things are slowly taking shape. I'll try to post some pics of the whole studio soon. It's amazing how long all of this takes to get things set up again, but I'm making strides.






Wednesday, November 4, 2015

bridgeport power feed








The Bridgeport also came with this very nice power feed system for the x axis. It has a high and low range which can be selected for a whole range of speeds. Tonight I helped one of my students mill some brass rod that needed to be faced for a long section of the rod. We used the power feed to rapidly face the pieces and it saved us from having to stand there and crank the dials for the repeated longitudinal cuts. I've actually formed calluses from cranking the dials on my mini mill and non power feed bridgeport so this was really awesome to me. I'm sure most of you out there won't care, but I thought it was cool nonetheless... call me "simple".



bridgeport optical system














My Bridgeport came with this optical system for reading the location of the table. This is listed as a Bridgeport accessory but i've never seen one before and there is limited info on the web about these. There is a small box mounted on the side of the mill that coverts 110V to 6V and there are small 6V bulbs inside the x and y readout boxes that illuminate the graduations that are magnified inside the window (sidetone: the bulbs look like small motorcycle taillight bulbs). The graduations are actually on small glass/mirror? like scales that are fastened to the x and y. The surface is protected by small rubber flaps that keep the scales clean. The graduations are in .0001 increments....CRAZY! Think of this as something similar to a Digital Readout or "DRO".

For more on this read below and check out images I found of one of these mounted on someone's machine.

Before the advent of electronic measuring systems, milling machines commonly had two methods of precisely locating work - mechanical and optical.  

Optical Measuring System for longitudinal and cross feed.
Another pre-electronic era device for the precise setting of work that involved no mechanical contact - and so avoided wear and consequent inaccuracy. The unit bolted to the machine using a majority of existing holes - and was protected in use by a neoprene guard. The longitudinal travel was 20 inches, cross travel 9 or 12 inches, the magnification x17 and the reading accuracy 0.0001 inches on a direct, single line scale. The scale had just one line to read - and no vernier estimations to be made.


















This is an Bridgeport Milling Machine optical measuring system. It operates like an old school DRO. It “reads” the table position in both the X and Y axis using optical lenses to view the glass scales, then transposes them measurements into the viewing screen. The viewing screen looks similar to a ruler, but is graduated in .001, with a smaller scale below for .0001 It is original Bridgeport equipment. The viewing devices are mounted on aluminum dovetail brackets the have thumbscrew adjustments. The whole system bolts up to the milling machine using the factory Bridgeport holes. It has a power supply with it that converts 110v power to 6 v DC, that powers the lamps for viewing. It uses little 6v motorcycle bulbs, readily available at auto parts stores. The only real drawback to this optical system is that you can not zero out the scales after you find and edge, bolt center, etc. You will have to manually keep track of your starting point, but it is not hard, and it works really well. There is a rubber protection strip that mounts above the scale as well to help protect from chips and fluids. These are very cool, work well, and have a certain Bridgeport coolness to them that any Bridgeport aficionado should appreciate. 


The item “Bridgeport Mill Optical Measuring System, old school cool DRO”.




bridgeport tracer atachment







My Bridgeport has this sweet tracer attachment. I haven't seen a ton of these but it seems like it might be nice for non CNC work and making duplicates. It connects to the quill and bolts to the face of the head. I'll have to see if I can find a project to test it on.






Wednesday, October 7, 2015

1945 bridgeport documentation
























Just a few original Bridgeport documents from 1945. I was freaking out when I saw all of this with the mill. The proposal/quote/brochure is so cool as is the info on the optical system, but the invoice is simply stellar. Looks like they ordered all the bells and whistles.





Followers