Two Sundays ago, Noah and I picked up a couple Quadrates and two intake manifolds to have has back ups and parts for the FJ motor in case I need them in the future. We met the kid that had them advertised on CL for cheap in Johnson Creek. It was fun to take a little trip with Noah to pick them up and spend some time together.
Showing posts with label quadrajet. Show all posts
Showing posts with label quadrajet. Show all posts
Wednesday, June 17, 2015
Saturday, May 30, 2015
quadrajet rebuild
I keep thinking that I'll get caught up with the folder of posts that I have saved to blog about. With the last few months, I simply was swamped and I can't even recall what transpired two days ago, let alone a few weeks. If I ever intend to get back to blogging, I'm going to have just pick up where I am and hope that I can put a few of the "lost month posts" in wherever I can.
Today, I rebuilt a Quadrajet 4 barrel carburetor. I received the Quadrajet in pieces as the previous owner had done a thorough cleaning, but I wasn't sure I would be able to find all the parts and pieces. Luckily these carbs seem pretty simple I had purchased a rebuild kit and was hoping that I might be able to do this on my own otherwise I was going to need a new carburetor and an adapter plate (or new manifold) to go on the 327. I already was starting with a missing choke plate and no choke mechanism so it was a gamble to see if this thing was even usable as it sat. I figured a $30 kit was cheaper to try then dumping over $350 into a new carb. Most everything I read about the "Quadra-junk" carbs was not favorable, but there are still some devoted folks who say that is all about the rebuilding and proper set-up. While I was in Illinois for Memorial Day, I even tried to hunt down some expert advice with some of my Dad's friends and some of my high school friends and most people advised to me junk the Quadrajet and go with a new carb. I continued to read more and it just seemed to me that these carbs were getting an unfair reputation.
The fact that I wanted to accept the challenge, and mostly the fact that I'm a cheap person, I starting reading about how to rebuild these last night. This morning, I went to the hardware store and picked up some missing bolts for the carb and some epoxy to seal two of the problem areas that everyone talks about on the rebuild forums. I got to work on the rebuild and followed all of the steps carefully along with setting the float level, and made sure everything was clean. By this afternoon, I was able to bolt it on and fire it up. Even without the choke plate (which I have ordered), it runs decent with the stock settings. Unbelievable!
Subscribe to:
Posts (Atom)