Showing posts with label south bend. Show all posts
Showing posts with label south bend. Show all posts

Sunday, July 12, 2026

land rover work




















I've been working on the Land Rover off and on since getting back from Detroit. I power washed the frame since it still had some grime from the Diesel engine and I still needed to cut out the dreaded steel bushings and take out the steering relay. I snapped a all four bolts on the relay retaining ring, so I had to drill those out. Luckily the relay came out fairly easier. I've heard of these being rusted solid. The bushings came out AFTER I had made a tool to press them and determined that the tool wasn't going to work on these bushings; again this is common. I ended up hacksawing the steel liner and driving it out. What a paon though. I'm not looking forward to pressing new ones in.

I still hadn't finished up the backside of the rear crossmember, so I machined a PTO sleeve on my South Bend and then made bushings for the hitch mount holes. I got that all welded in, so now it's ready for paint.

I've also spent some time cleaning up some of my petrol engine parts. I cleaned the valve cover the other day and I currently have the axles completely torn down and the housings ready for paint.




Monday, January 6, 2020

grungy machinist machining posts









Interesting Machining Photos from Instagram user: Grungy Machinist.

The LeBlond "Portable Engine Lathe" from the 1930s. It was made in 15", 17" and 19" swing versions and advertised as being suitable for use in "railway workshops, arsenals and battleships." I hope they had a good way to lock those wheels on battleships.

Advertising photo shoot for 9" x 3' South Bend "Workshop" Lathe. Circa 1938. Look at that long chip

Truing an armature and commutator on a 9" x 3' South Bend Workshop Lathe. 1937⁣
⁣
⁣Hanging behind, near the tailstock, is a hand operated mica undercutting attachment.⁣

Machining a bushing on a 13" Underneath Belt Drive Motor South Bend Lathe. 1948 Photo was used in a 1949 calendar

Measuring a part on an old "O" Series South Bend lathe. I like the little chip pan on the floor. Circa 1935 ⁣⁠ Follow

Using a Bridgeport 1/2 HP M head on a table mounted to the floor of a NASA wind tunnel to mill and drill for access panels.




⁣



Monday, September 3, 2018

erin ethridge sculpture















This summer, I helped Erin Ethridge machine some bearing "top hats" for a sculpture she was working on. We cut the majority of the part on the Tormach and then bored the bearing seat on the South Bend 9". The bearing was a press fit using the hydraulic press. These turned out really nice. She recently installed the piece in Texas.




Friday, June 9, 2017

south bend 9" resto






Last night I stayed up late and worked on stripping the paint off of my South Bend 9" Model A bench lathe. I used a citrus stripper from Lowes and let it sit on the Tractor Supply implement paint that I had used in grad school to restore the lathe originally. I used a hardener with the paint initially so it was really tough to remove with just a wire wheel so I decided to let the citrus stripper sit on the parts for a full week in my garage. The paint finally lifted and last night I took an angle grinder and wire wheel to the parts. They cleaned off so quickly and easily. Tonight I had a few spare moments to mix up some Rust-Oleum Smoke Gray and Royal Blue paint. I mixed the paint 1:1 to try to get a bit of a VW Dove Blue or Naval colored Blue Gray. I think I'm close.; the florescent lights don't quite get the color right here, but I think it will look good. My other lathes are all gray, but I wanted to change the color a bit for this lathe. This lathe is going to go in my garage shop so I can turn pieces for the home and work a bit from home after the kids are asleep. I'm looking forward to getting it painted and back together.



Thursday, June 16, 2016

lathe: poor man's indexing head


Today I was working on the forge that I'm building. I thought I would share my poor man's indexing head with you all so you can see how I layout holes on the fly when I don't want to "get all technical". I've been feeling that my own need for perfection can sometime get in the way of making progress. I believe is was Salvador Dali that said "have no fear of perfection, you'll never reach it"; just something to think about when you're not getting work done due to the perfection issue... 

The forge requires four evenly spaced holes around the circumference of the DOM tube to hold the burner. This creates a kind of "Christmas tree stand" that grips the burner securely. I needed to make many of these burner holders since I'm machining these inlet tubes for Chad and John as well as myself. I didn't want to spend time doing individual layout on each tube so here's the technique I use:


I use masking tape to create a flexible ruler.


I figure out my spacing on my holes based on the diameter of the DOM steel tube and then I create witness marks on the tape to represent that spacing. An extra mark is made to help line up the tape later (you'll see what I mean in a second).


My little 9" South Bend Model C has a smooth spindle adjustment nut on the back end of the spindle. I clean this nut off (as it usually has some oil on it from the rear bearing surfaces on the spindle) and then carefully wrap my flexible ruler around the smooth spindle nut. I make sure not to stretch the tape when I'm applying it. The final extra mark should line up with the first witness mark on the tape as you overlap it. If it doesn't then your spacing will be off. Make sure to get this right!


The old South Bend has this small gap between the bearing caps. This become my stationary witness mark that aligns with my flexible ruler when I rotate the spindle. In the past I have secured a sharpened paperclip to the lathe headstock if I need a thinner, more accurate "pointer".


I had already turned two grooves at the proper location that would allow me to align the marks along the length of the DOM tube. All I needed to due now is align my flexible ruler mark with the slit in the bearing cap and then I can use the lathe toolkit to scribe across the turned line to create a crosshair. I simply position the lathe bit and feed a little pressure into the workpiece using the crossfeed. Then (with the lathe off obviously) I just move the carriage of the lathe back and forth a bit to create the cross mark.



I lighten up on the crossfeed, move to the next groove, and make another mark. Just make sure your witness mark is still aligned before making this mark.


I rotate the spindle manually, align the next witness mark on my flexible tape ruler and repeat the process.


Now I remove the piece from the lathe; It now has four equally spaced witness marks that I can use to center punch the hole locations.


I used my digital calipers to make sure everything was equal before center punching the marks.


I used my automatic center punch to create a nice deep divot to guide the drill bit.


After all the marks are center punched, I'm ready to drill.


My friend Ian made this long section of wood v-block when we were in grad school. I just used the table saw to make this, but I use this ALL the time to hold round stock. It's not precious so I can drill into it and cut off sections for various jobs.

In my opinion ever serious maker should own a machine lathe. My students all know that I harp on this all the time. 3D printers get hyped, but the lathe is the original tool that we should all be singing the praises of (well besides maybe the hammer and the screw). Do yourself and find yourself a 9" South Bend. I guarantee you'll make more useful objects/tools than you can shake a stick at. You can use it to make more accessories and actually improve itself with (sound familiar 3D printer folks?; that's right the lathe was the FIRST tool to improve itself). You'll become more accurate, and you can use it like this, to speed up your productivity without getting too obsessed with accuracy. Go get a lathe!

I'll try to start posting details on the forges soon. We're all trying to get all of the various components made before we blog about them. We should be able to create a massive series of how to posts on the forge build in the near future.







Followers