Showing posts with label leo. Show all posts
Showing posts with label leo. Show all posts

Monday, June 9, 2014

leo saul berk: the uncertainty of enclosure






































As you may remember, Leo Berk came to Milwaukee a few months ago to work as an artist in residence in the DCRL. If you are a blog follower you may remember that we spent some time working on a CNC router Corian wall with the help of UWM students, Alissa Fedor, John McGeen, and Joe Massanisso. Well last week Leo came back to Milwaukee to install his exhibition, The Uncertainty of Enclosure, in the INOVA art gallery on the first floor of the Kenilworth Building. Alissa did a ton of work with Leo throughout the week and on Wednesday, with the help of Chad Bridgewater, we were able to move the Corian wall up to the gallery. On Thursday, John McGeen helped out and the whole gallery install group lifted the first piece shown above, up on edge. Alissa had spent most of the early part of the week helping Leo assemble this piece. Alissa finished out the week by sanding the coal salt cellar, which I might add, is stellar (Leo CNC cut this from a large chuck of coal) and suggests Leo's early background as a ceramist. There are many more pieces in the exhibition which are not shown here. This collection of work is really spectacular. My family went to the opening on Friday night and Jill and the kids were able to meet Leo and to see the work. We really enjoyed the discussion that Leo and Sidney had in regard to the work and the Bruce Goff house that Leo grew up in, and that Sidney currently lives in. I can honestly say this is one of the best exhibitions I have seen at INOVA. If you get a chance, please go see the exhibition. I guarantee you will be inthralled by Leo's work. 

Many thanks to Leo for coming to Milwaukee and for working in the Digital Craft Research Lab with our students. You can read more about the exhibition and residency here.



Monday, March 31, 2014

leo berk prt. 5






On Saturday, Alissa and Leo worked on gluing the last piece and then she worked on filing all of the tabs and seams. Leo worked on sanding the seams and I later came down and helped Alissa file seams. We gathered up all of our tools, moved the piece in the gallery storage area and Leo rushed off to catch his plane. It was a whirlwind of activity: troubleshooting, planning, logistics, cutting, filing, bending, and assembling. 

What a great experience to get to work with Leo. I have to admit that I was worried about working with an artist that comes in for a week and makes two pieces while they are here. No worries here though. Leo is a top notch artist and most importantly an outstanding individual. You will not meet a more prepared and and thorough maker. I was impressed with his knowledge and the speed at which he works. You can tell that he has tons of experience and therefore it was a pleasure to work with him. It's not too often that you get to work with someone of this caliber. Thanks Leo!




leo berk prt.4













After getting two of the sheets cut on the router, we decided to take the sheets down to the basement woodshop for gluing. At this point, the sheets were quite fragile, so we would not be able to use the elevator. We decided to go down the stairwell, but we could only go one flight of stairs to the parking garage, as the second and first floor stairwells were too tight. Once in the parking grange there is no way out other than the elevator or the first level ramp. Only problem is that the ramp has a door that requires a special pass. We stood around and tried to figure out what to do; all the time holding the fragile yet surprisingly heavy Corian. I joked that I felt like we were lining up for a soccer penalty kick. Leo, his wife, and daughter were all staying in the residential side of Kenilworth so they had a pass in their car. A quick call to Leo's wife, and she was on her way to let us out. We walked along side her car with the fragile Corian lattice-work so we could exit the building. We joked that we could envision the garage door coming down and crushing the middle of the sheet. Luckily that didn't happen. We walked to the other side of the building and into the woodshop loading dock. We clamped the pieces to the armature/crate and Leo and Alissa got to work gluing up the first two sheets. They also tested gluing the marbles in place as well. Joe babysat the router while I attended graduate meetings the entire afternoon.





leo berk prt. 3




As our luck would be, our router's bearings were shot after completing the first sheet of Corian (due to a lot of use since building the router). Jill ran out to Lowes first thing and found a new Bosche that I would be able to replace the old one with. I got to work on this  and changed it out, so we could get up and running again. The students completed the filing of tabs on the first piece and then worked on assembling another piece that will be in the exhibition. Leo had cut this "copper cone" on his router and had flat packed the piece and shipped to us. It's made from CNC router "scored" alu-panel. Alissa, John, and Joe, unpacked the panels, peeled the protective coverings, and then Leo instructed them on how to bend the panels at the score lines. Then they started assembly of the various cone sections.  I stayed downstairs and bonded with the dull hum of the router and the dust collector. Once the cone was completed, they dismantled it into two manageable sections and put it in the gallery storage area. This piece is going to look great in the gallery. The students also built a wooden armature for us to glue the Corian sheets together later that day. It was a busy day.



leo berk pt.2
















We came back the next day to continue cutting only to find out that the machine had gotten out of position somehow. We soon discovered the router was missing steps for some reason. I switched computers and within 10 minutes we were up and running. Only then, we found out that we were now out of calibration on the number of steps it takes to move a certain distance. We also found that the gantry was not square to the x rails on the machine. Feeling a bit deflated, we trudged ahead and Leo and I were able to get things squared and then calibrated. By this time we had wasted most of Tuesday, but we decided to make a test cut of his file in 1/2" mdf. We tested this and everything seemed correct. We stopped the mdf cut and loaded the second sheet of Corian and he ordered another sheet to replace the  first one I had messed up. We cut the first half of the sheet and decided to keep going on the second half so we could at least make sure that everything matched up after reindexing. We wanted to make sure everything was "right" for the other two sheets we would be cutting. The first sheet indexing turned out well and by the end of Tuesday we had the first sheet completed and ready for filing of the small tabs inside the openings we were cutting. 

From this point on, we jut kept cutting Corian. The new sheet was shipped the same day as ordered and it arrived from Minneapolis the following day. The students and Leo sanded it while I babysat the CNC router. We had four bit changes on each half of sheet, so there was a lot of back and forth on setting things up and double checking to make sure everything was accurate. I was stressed all week after experiencing the Tuesday set-back and I was praying that the other sheets would go well. Corian is expensive, not to mention Leo's exhibition was at stake.

Here is how Leo described the piece when he proposed making it in the DCRL:
For this piece, I extracted the mortar joints from a photo of a masonry wall and cut those lines from a sheet of 1/2" thick Corian. Corian is a mixture of acrylic and alumina trihydrate and cuts nicely with CNC routers, though can wear through tooling faster than wood. The original masonry wall also had marbles embedded in the mortar that were squished in at differing depths. The backside of this piece has spherical pockets cut at the appropriate depths to set the marbles correctly.

I'll tell you more about the inspiration for this piece later...




Followers