Showing posts with label metalsmithing. Show all posts
Showing posts with label metalsmithing. Show all posts

Tuesday, February 21, 2017

hai-chi: eutetctic inlay


Right before I left Milwaukee, a local Metalsmith named Hai-Chi Jihn enrolled in my summer course on Drawing for Digital Fabrication. Hai-Chi had previously taught at Cardinal Stritch University in Milwaukee and so I had been aware of her and her work since first arriving in Milwaukee. That said, we had only met once at an opening. After spending four weeks in the course with Hai-Chi, I have to admit that I was so bummed that we had not met early. Simply put, Hai-Chi is a wonderful human being. I don't believe I have ever met such a hard worker and such a kind and thoughtful soul. I was so sad for the course I was teaching to be over as I knew is marked the end of having daily conversation with Hai-Chi.

During the course, Hai-Chi shared her method for making amazing inlay pieces. Check out the following images.




Note registration marks for applying PNP paper (resist) to both sides of the brass shim stock.



A view of the brass shim stock from McMaster Carr.



Brass after etching using ferric nitrate. (note Hai-Chi has cut a section of this piece out for use in an object she created)











Amazing detail in the images of the etch above.







Here the brass is fused (not soldered) to the silver by taking advantage of the eutectic melting point.







The two photos above show the sheet after it has been run through a rolling mill. The metal pattern distorts slightly but further imbeds the brass into the silver creating a single sheet.









Above you see objects fabricated from the sheet. In this case we are viewing some hollow constructed forms.



This process takes advantage of the eutectic melting point when silver and brass are brought together and heated. The melting temperature of these two metals is lowered when they are touching each other. The word "eutectic" comes from Greek and means "easily melted". The eutectic melting points of silver, copper and zinc (the metals present when soldering silver to brass). The melting point of a copper / silver / zinc alloy is significantly lower than the the melting point for each individual metal, this is why zinc is used in silver solder (if you want to "make silver solder" you can melt a bit of brass with your silver). 

What happens on heating is that the solder at the joint melts first and alloys with the metals either side of it (which is required for a strong bond), however, with these two metals, the alloying process does not stop there - the reaction runs away with itself as the metal at the joint alloys up into the silver. This run away alloying and melting is why you never put silver next to brass when you laminate a mokume gane billet.

A big thanks to Hai-Chi for taking my class and for allowing me to post the images of her work! I've been showing this to my Intro students and they have been amazed by her work.





Thursday, September 24, 2015

Monday, April 13, 2015

Thursday, February 26, 2015

spinning chalice



Arthur posted this and it was too good not to share.





Sunday, August 17, 2014

tedd and becky mcdonah










As I mentioned in an earlier post, both Tedd and Becky McDonah attended a workshop that I taught last week. I thought I would share some pictures of the t-shirt and pins that they so graciously gave me and my colleagues. I love the gifts and can't tell you how much it means to have connected with them both. They are my kind of people for sure. I thought some of you might be interested in seeing their work. Tedd's Etsy site can be accessed here if you are interested in his lures and I'm sure you can find more images of Becky's work on her website here.




Wednesday, October 30, 2013

clarissa halat


















Clarissa Halat is one of my former students who just graduated last semester. She recently participated in the Milwaukee Makerfest by putting on a workshop on jewelry making. I came across her Flikr site when looking through some of the promotional info from the event. I had seen her necklaces in her final show and Jill and I were both big fans of the pieces when we went to the opening. I hadn't seen the final images of her senior work, so I was shocked when I saw the images she had taken. Clarissa was one of my Intro students a few years ago and she had taken many classes with me. I remember seeing her paintings in one of the scholarship shows when she was in my Intro course and I was amazed at her ability to use color and mark making in her paintings. At some point she decided to become a Metals major (possibly due to some slight prodding from me) and the rest is history. I really enjoyed working with her during the last few years and miss seeing her around the studio.

Clarissa is always so thoughtful and I think it really shows in this work. I hold her in high regard and I'm proud of her for being motivated to take those important "first steps" after graduating to realize what she can do in her future endeavors  She stopped by my studio last week and it was so good to talk to her. She is going to be showing work at the Harley Museum during the Art vs. Craft event on November 30th. If you want to see her new work, make sure to go check it out at the event.






contour


Just too good to not repost. Thanks Arthur!







Tuesday, August 27, 2013

metalsmith




My Isabella Cutter "Knuckles" made it into Metalsmith magazine's "Exhibition in Print" annual issue this past week. That was on the list of things to do, so it felt good for this to happen.










Followers