Showing posts with label students. Show all posts
Showing posts with label students. Show all posts

Sunday, February 19, 2023

weekend work






















It's been a busy weekend. I ran a job for Chloe (student). She's making the pressed steel cross stitch patterns and I'm drilling them on my CNC router. I did three different designs for her this weekend. It's taken most of the weekend to run these. I have to run the router super slow to prevent burning up bits since we're using a number 52 bit for all the holes. Some of the designs have over 3500 holes so it just has to peck away. I learned early on not to mess with trying to run it fast; burned up a few bits. I now have it to the point that I can make a bit last for at least 300 holes. Not too bad in my opinion.

While those were running on the router, I got Lela's (a student) test folded paper bowl ready for casting. Lela is folding paper and assembling these complex three dimensional forms. The one here is small compared to the others. We want to attempt casting some of these via lost paper mold. She probably wants to do aluminum due to cost but I want to see this in bronze. Anyway, we're ready to invest now.

While all of this was happening, I cut some die forms for Asheville jeweler, Laura Wood. I'm going to heat treat these this week and get them to her. I had helped her wit some similar design work before COVID when she took a workshop with me at my studio. Now my former student Elizabeth Walton is working for her and so Elizabeth asked me about these I said I could cut them instead of her using a service bureau. It's a good excuse to test out heat treating aluminum. I've been reading up on it. Looks like it should be simple to do. I suppose I could have cut these in steel, but I had to use a .03 end mill in some sections and I didn't have any steel plate on hand (the right thickness), and I wasn't looking forward to cutting steel with those small end-mills.

I also worked on some RhinoCAM for the inner Ferrari handles and my McMaster Carr order for brass came in so I can cut those soon. I ended up casting bronze versions from some Form Labs 3D prints, but I want to see what the machined ones look like compared to the cast ones. I smoothed out the cast ones while machines were running.

I also worked on one of my cast iron teapots since I have a couple exhibition opportunities coming up. Still trying to decided if I want to enamel this and I think I may design a new handle design for it.

Oh, and I talked to Eric this weekend. Sounds like we're both going through similar stuff in life right now. We've decided to try and help each other out by making a point to chat more frequently. It was good to chat with him. It's reminded me that I need to take time to draw more and I need to plan some big projects that I've had for a while; or at least dream about them to get the ball rolling.

Oh, I put together a bunkbed for Olivia tonight in between the work and helped her cut some wood that she was whittling today. I gave her a pocket knife to and we talked about being responsible with it. Small lessons, but important nonetheless.

Well it feels good to list all of this here, as it's Sunday night and I've been feeling like I haven't gotten anything done for a while. I need to make a point of doing this to keep myself on track.



Tuesday, July 12, 2016

bronze workboots



On the topic of parting gifts and Milwaukee influences. Chad Bridgewater just gave me these bronze workboot soles/ footprints that he cast a few years ago. Chad is on the same list as Bryan, that I mentioned in my previous post. Chad and I met when he enrolled in the first Industrial Processes course the first year that I started teaching here at UWM. Chad was a Sculpture major but decided to take a few Metals courses. We immediately hit it off with our interests and thoughts on society and the future of fine craft; not to mention, at the time, we both thought that we were born in the wrong time period. Chad graduated with an emphasis in Sculpture and Jewelry/Metalsmithing. After graduation he worked a local foundry job, but then returned to graduate school where I was his major professor on his graduate thesis committee. During that time Chad assisted me in really whipping the DCRL into shape. We built the large 4' x 8' CNC router together and he helped me realize many of my ideas on organization and set-up of the space. Together we built most of the tools and displays and created digital files for many of the objects and tools in the lab. He also assisted with all of the digital file organization that we now have as a part of the DCRL file resource. 

Chad is an amazingly talented individual. He truly has a gift for creating finely crafted objects and I am proud of his tenacity in learning new techniques and thinking about the meaning behind his actions. I have always respected Chad and his abilities, but he has made me most proud in seeing what he has accomplished most recently with his freelance work for Boca Bearings, video documentation, and home studio building. I am also extremely proud to see him in the role of teacher. Like Bryan, Chad has grown into a great teacher and his enthusiasm for teaching is evident in his student work. I will miss our recent Saturday morning tool-building sessions, but I know we will forever be connected through our love of teaching and creating. 

Thanks, Chad for all that you did to help me build and envision what the DCRL could be. But thank you most for your friendship from the time of our first conversation in the Metals studio up to now! When I look at your work, I'll be sure to think about our many iron, aluminum, and bronze pours and the fun times working in the DCRL together!



Thursday, February 18, 2016

next step prosthetic leg covering

















Last semester my senior level Digital Fabrication and Design students (Fred Kaems, Becky Yoshikane, Sara Shuler, and Calvin T. Rupnow) engaged in a project that involved the creation of a 3D printable prosthetic leg covering or fairing. This object is intended to restore the anatomical shape of the affected limb, to be customizable, and to be 3D printable on tabletop scale 3D printers. Veterans are the intended recipients of this unique prosthetic leg covering. The project, entitled "Next Step", is provided as a way to give veterans the opportunity to customize and create a bespoke covering that mirrors their personality or interests.
The project began with an introduction to Gerald Ortiz of Melody America who put our students in contact with Sgt. Eric Rodriguez USMC. I was introduced to Gerry through my work with Enable. Gerry runs Melody America, an organization that promotes adaptive music therapy for veterans. We discussed the fact that many amputees would like the opportunity to restore the anatomical shape of their affected limb. Conversations began about how Digital Craft Research Lab students at UWM might be able to use their unique design and fabrication skills to design and create a printed fairing that could be offered as an open source device for veterans who wish to have a customizable prosthetic leg covering. One of my summer DCRL interns, Hugo Martins, and I began working on the project during this past summer by creating 3D scans of Sgt. Rodriguez's prosthetic leg socket and brainstorming ideas about what the covering might be and how it might function. Later the Sgt. was kind enough to loan us his back-up leg so that we could design around the full leg and all associated components. 

The Fall 2015 semester began and I decided to involve my senior Digital Fabrication and Design students in the project so that I could see what they might create for Sgt. Rodriguez but also as a way to demonstrate the unique ways that craftspeople, artists, and designers can utilize their skills and knowledge to solve specific problems for individuals. I frequently speak to my students about the role that we all play in society as craftspeople. There was a time when people who made things were valued by society and they enabled communities to thrive and grow. The "makers and fixers" were the facilitators of a self sufficient life and they also had the opportunity to infuse individuality into our world through ornamentation and design, and to create experiences that are unique to the user. That said progress was comparatively slow because of the transfer of knowledge and the speed and efficiency with which things could be created. The industrial revolution changed that progress, but sacrifices were made to the individual's needs as well as the value of the maker who create one of a kind objects. We live in a unique time where technology, the knowledge of process and material, and problem solving are valuable commodities. Makers are now using hybrid practices to solve specific problems to create objects that address the needs of an individual. In addition, craftspeople are now able to solve problems remotely and the local community has now become a global community.The ability to connect is allowing those in need to have voice that is heard, and the hybrid practice established by craftspeople, artists, designers, and programmers is allowing Craft to regain a foothold that mirror's and adapts to it's own origins of connecting with community and creating objects with purpose. My students understand that they have a role to play in their society and that they have a responsibility to create a better world through the objects they create. They understand that their skill set and knowledge is important in a world with more problems than solutions. Assisting Gerry Ortiz and Sgt. Rodriguez seemed like a unique teaching opportunity that could benefit everyone involved.

Over the next fifteen weeks of the semester, I chartered the students with creating three prototype leg coverings. The first prototype would be a leg covering that was designed for their own body. This would be an opportunity to think about what they would want for themselves if they were to create a leg covering for a specific occasion. The second prototype would be a leg covering that is one of a kind prosthetic leg covering for Sgt. Rodriguez. The students would interview Sgt. Rodriguez to get his advice on what his interests are, as a way to develop a design that is custom designed to his specifications. The third prototype would be a group project that involved the students building off knowledge gained from the first two projects, and design criteria insisted on the leg covering being designed with ease of customization and production. The third prototype was to be built to Sgt. Rodriguez's prosthetic, but needed to be adaptable or customizable by anyone with the same model of lower prosthetic leg. The leg you see above is a result of this investigation. Each student then created custom front fairing pieces to allow users to interchange or modify their front panel. In the coming weeks I will start showing the work for each of these prototypes, from Becky, Calvin, Fred, and Sara. 

A few weeks before the current Spring semester began, I recommended that the students enter their final design and prototype into a competition so that they could utilize funds to further develop documentation and finalization of designs, as well develop relationships with other veterans. This week we discovered that the project had advanced to the finalist stage of the competition.  Our team of UWM/PSOA students submitted "Next Step" in the Infy Makers awards/contest. The student group has made it to the top 25 nation wide, and hope to move into the top 10 where each team will be awarded $10,000 when voting ends on March 14th. 

Please vote and help the students win so that they can further develop the project, develop documentation on fabrication and assembly instructions, and release this design as an open source design for anyone to print. 

Follow this link to view the project and vote: http://bit.ly/1okVmNV


You can vote once a day and we appreciate your help in making these designs available to anyone.








Students working in the Digital Craft Research Lab at UWM have the unique opportunity have access to most any tool or process that is needed to create something using both the latest technology as well as traditional processes and the students are well versed in what it takes to make something out of nothing. The lab and our digital fabrication program fosters innovative, creative research in the areas of design, craft, and art by combining advanced digital technology with traditional craft practice in an effort to educate students for the future. The DFD program fosters interdisciplinary design research, material research, and innovation through making. The program is envisioned as a facilitator for partnerships between UWM researchers and regional businesses, nonprofits, arts organizations, other universities and schools, and most importantly local and global communities.


Saturday, February 6, 2016

aaron de lanty


Aaron De Lanty is in graduate school at Oregon College of Art and Craft. Aaron worked with me in the Digital Craft Research Lab when he was a student at UWM. He worked with our design group during summer sessions in the DCRL and worked on the underwater scanner rig that we built for Nathaniel Stern. Aaron also worked for Betty Brinn Children's Museum as a result of some connections there that he made. Now Aaron is in graduate school and he's contemplating the meaning of life, objects, and why we do what we do. Aaron keeps weekly vlogs about his time in school (sidenote: I think these will be interesting for Aaron to look back at after he's completed his degree). 

This past week, Aaron left a really kind post. I have been enjoying seeing Aaron work through his grad experience, so this one was a real treat to watch as spoke such kind words of the times we worked together. Aaron doesn't realize that it was his eagerness to learn that made our experiences what they were. It's funny how we think it's people's influence that makes the impact, but in reality sometimes is just the reflection of our own enthusiasm that has the largest impact. It's all about enabling ourselves to follow our dreams and aspirations and sometimes having someone by our side to reflect our passion makes getting over the fear of taking the first step that much easier. I have had some great teachers in the past who I realize were facilitators for my dreams by being positive individuals and influences. I am thankful for those people, just as Aaron is thankful for his time at UWM. 


clarissa = kindness






I received a wonderful gift the other day from Clarissa Halat. You may remember Clarissa from a blogpost I made from a while ago. Clarissa was one of my students several years ago and she has now relocated and she decided to send me this beautiful sketchbook made by Shinola; the company she works for. Clarissa has to be one of the most sincere and sweetest people I have ever met and I have always felt that she demonstrates the same kindness that my grandmother had for all people and all things. I think this demonstration of kindness defines the way Clarissa looks at the world and I am so grateful for her outlook. She appreciates and notices things I think other people don't see because they're too self absorbed.  Many people do good things hoping for recognition, but Clarissa takes action because she believes in the people and reasons she does them. The world needs more "Clarissa Halat-like" people.

Go follow Clarissa on Instagram.





Tuesday, August 4, 2015

form student exhibition


UWM students and alumni are showing work at this weekend's Morning Glory Craft Fair in Milwaukee. Check out the website that Caitlin made for the show. She has been working so hard to make all of this happen. I'm so proud of her.



Friday, January 16, 2015

aaron and bryan: hackaday


My fellow makers and former students, Aaron and Bryan, had a Hackaday post written on a process that Aaron did for a metals tech credit that he did before he graduated from UWM. The process involves electroforming 3d prints. Upon graduating, Aaron has really found his own way by investigating this process and applying it to many different substrate materials such as laser cut wood and 3d prints to make jewelry. We used to do quite a bit of electroforming when I was in graduate school, but we used to use natural materials, hot glue, or wax for our substrate material. We also used pvc glue and copper powder in place of sprayable bronze or conductive silver paint. We would buy the copper powder from caswell plating and mix our pvc glue into a small salsa jar so you could just shake it to mix it when the powder had settled over time. Once the object was coated in conductive paint we would submerge it in our electroforming bath or plating solution and walk away for a day or two until a nice thick layer of copper was "grown" over the substrate. Then we would drill a hole in the piece and heat the piece with a torch to melt the wax out or incinerate the material inside. We would be left with a lightweight hollow copper form that we could then incorporate into a piece or conduct secondary operations on such enameling. Aaron moved into a studio space in Bryan Cera's lower residence upon graduating and they have had a sweet thing happening there for a while. I couldn't be happier for the press they're getting.

As a side note Hackaday did a post about the laser etching stainless steel post during Christmas. Good to see the DCRL folks getting a little recognition.




Monday, January 5, 2015

eyewear 2014: critique















Here are some images from our eyewear critique that happened at the end of last semester.





Followers