Showing posts with label montesa 247. Show all posts
Showing posts with label montesa 247. Show all posts

Wednesday, January 1, 2020

cota 247 sheared mag key






On New Years Eve I worked on the Montesa Cota 247 reed valve engine that I have had sitting around forever. Before Christmas, I tried getting spark and fuel to it and discovered that I would get a loud backfire every time I tried to start it. The timing looked right and the points were set properly. I decided to pop the flywheel/mag off to see what the trouble was. It appears that the key was sheared and this allowed the mag to slip. It also appears that this happened a while ago; signs of all the rust on the area where the mag should have been seated. Yesterday, I cleaned out the remnants of the key and made a new key. I also lapped the shaft and mag to try and get things seated properly. Apparently this was a common problem on these bikes with shearing the key. I got everything back together and was able to get the 247 to pop over a few times. Now I think I need to double check timing and then figure out carb and exhaust sealing to insure to air leaks. The compression is strong on the motor so I believe this engine may have sat after the previous owner couldn't get it to run. Good for me, as I can get things set right and get back to riding it.





Followers