Showing posts with label jeweler's bench. Show all posts
Showing posts with label jeweler's bench. Show all posts

Wednesday, March 14, 2018

shopbot CNC cut jeweler's bench






















I've been planning on making this Open Source CNC Jeweler's Bench for a while utilizing a CNC router. I inquired about buying new benches for the studio on campus at the start of the school year and the Dean thought this was something she might be able to do. The current benches are junk for proper posture when sawing and filing and the studio would also just look better with some proper benches. Since there are no funds for buying new benches why not design and make benches using the router. This has been my philosophy with the Digital Craft Research Lab from day one. Buy the tools that allow you to make the other tools you need.

I was so familiar with my old CNCRouterParts router that Chad and I built in the old Digital Craft Research Lab in Milwaukee, but just was not as familiar with ShopBot interface and procedures. After Chris Burns came in to do his workshop on the ShopBot, I felt like I had a better handle on the use of the ShopBot. Well over Spring Break I finally got to a place where I could cut the jeweler's bench. While I was casting and anodizing in the main studio, I pulled up the file and got the CAM side of things in order so I could test one out. I probably should have cut a test bench in cheaper plywood, but I decided to go for it in birch ply. The bench is made so it doesn't require any fasteners or glue and it just goes together with the slot and tab construction. It takes one full sheet of 3/4" and one full sheet of 1/2" plywood. Luckily, I measured everything well and allowed for tolerances to not fit too tight or too loose. I was so stoked when this came together last week. I have so many ideas for this bench and little design tweaks I'd like to do. I still need to complete the drawers, but I went ahead and put polyurethane on the main bench and put it in the campus studio to use as a demo bench. 

Since funding fell through for new benches I think I've decided to offer these bench designs for sale until I can raise enough dough to pay for the wood so I can cut 14 more benches for the campus studio. My students are really excited about the prospect of having proper benches in the studio. When I get enough money for this, I would like to offer the plans for free download. I still need to make a few minor tweaks but I'm close to being able to offer the plans. I have dreams of designing a few 3D printable and CNC routed tool holders and tool organization for the bench. The addition of an organizational hutch would be cool. I think this could really become something that a lot of jewelers would want. I also love that the bench is completely flat packable. It would be easy to ship if people were wanting a jeweler's bench cut on a CNC router near them. I'll get some final studio shots of the completed bench up soon and hopefully get the files finalized for download. Stay tuned on this project... more coming soon.

Thanks to Chris Burns for coming to Appalachian State to conduct the ShopBot demo.






Thursday, June 22, 2017

cnc jeweler's bench



I've been working on a CNC jeweler's bench design and trying to get it finalized so I can cut one on the CNC router at school. I want to be able to make a bench that can be used in our school studio. A complete set of new benches (16 benches) would cost over 4 grand and I believe I can create a complete set of benches for the school studio for under 1.5 grand in wood. If I could get a wood donation, I would only have the time and effort in cutting, fabrication, and finishing. We really need these benches as it would open up a lot of storage space for student tool kits in the drawers, the size of the bench would improve studio layout, and it would allow better posture/seating for students when working. I hope to be able to offer this design as an open source design for people interested in building their own bench once the file has been verified. I have some tweaks to make, but it's close. I laser cut a scale version to see if I was missing anything. I hope to cut the first scale version next week.




Thursday, August 21, 2014

jeweler's bench inspiration





















Just some pics pulled from the interweb that give me inspiration for my basement studio space.




Followers